 | Prince Two-Spool Control Valve, Model# RD522GCGA5A4B1
Brand: Prince
Two spool to 25 GPM. With one standard 4-way port and one float. 3/4in. inlet and outlet ports; 1/2in. working ports. Valve will accept power beyond conversion plug. Internal load check. Relief pressure set at 2000 PSI; adjustable from 1500 PSI to 3000 PSI. Load check for each valve. U.S.A. | *$219.99 |
 | Prince Two-Way Detent Valve, Model# LS-3010-2
Brand: Prince
For open center systems. Two-way detent; 3/4in. in/out 3/4in. work ports. Relief valve adjustable to 2750 PSI, preset at 2250 PSI, flow rating up to 25 GPM. Automatically kicks back to neutral when cylinder completes stroke. Built-in relief valve ports. Hydraulic balanced, hard chrome plated spool. Handle can be installed in up or down position. Detent release pressure adjustable from 600 to 2000 PSI. Warning: using a pressure detent in both directions can be dangerous. USA | *$84.99 |
 | Prince Welded Tee Cylinder - 2500 PSI, 2 1/2in. Bore, 12in. Stroke, 1 3/8in. Shank, Model# PMC-5412
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 2 1/2, Stroke Length (in.): 12, Closed Pin Center (in.): 20, Shaft Diameter (in.): 1 3/8 | *$159.99 |
| Prince Welded Tee Cylinder - 2500 PSI, 2 1/2in. Bore, 16in. Stroke, 1 3/8in. Shaft, Model# PMC-5416
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 2 1/2, Stroke Length (in.): 16, Closed Pin Center (in.): 24, Shaft Diameter (in.): 1 3/8 | *$179.99 |
 | Prince Welded Tee Cylinder - 2500 PSI, 2 1/2in. Bore, 8in. Stroke, 1 3/8in. Shaft, Model# PMC-5408
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All-steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 2 1/2, Stroke Length (in.): 8, Closed Pin Center (in.): 16, Shaft Diameter (in.): 1 3/8 | *$149.99 |
 | Prince Welded Tee Cylinder - 2500 PSI, 3 1/2in. Bore, 24in. Stroke, 1 1/2in. Shaft, Model# PMC-5524
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 3 1/2, Stroke Length (in.): 24, Closed Pin Center (in.): 32, Shaft Diameter (in.): 1 1/2 | *$229.97 |
| Prince Welded Tee Cylinder - 2500 PSI, 3 1/2in. Bore, 36in. Stroke, 1 1/2in. Shaft, Model# PMC-5536
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 3 1/2, Stroke Length (in.): 36, Closed Pin Center (in.): 44, Shaft Diameter (in.): 1 1/2 | *$259.99 |
| Prince Welded Tee Cylinder - 2500 PSI, 3in. Bore, 20in. Stroke, 1 1/2in. Shaft, Model# PMC-8320
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 3, Stroke Length (in.): 20, Closed Pin Center (in.): 28, Shaft Diameter (in.): 1 1/2 | *$219.99 |
| Prince Welded Tee Cylinder - 2500 PSI, 3in. Bore, 36in. Stroke, 1 1/2in. Shaft, Model# PMC-8336
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 3, Stroke Length (in.): 36, Closed Pin Center (in.): 44, Shaft Diameter (in.): 1 1/2 | *$269.99 |
| Prince Welded Tee Cylinder - 2500 PSI, 3in.Bore, 12in. Stroke, 1 1/2in. Shaft, Model# PMC-8312
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 3, Stroke Length (in.): 12, Closed Pin Center (in.): 20, Shaft Diameter (in.): 1 1/2 | *$174.99 |
| Prince Welded Tee Cylinder - 2500 PSI, 3in.Bore, 16in. Stroke, 1 1/2in. Shaft, Model# PMC-8316
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 3, Stroke Length (in.): 16, Closed Pin Center (in.): 24, Shaft Diameter (in.): 1 1/2 | *$189.99 |
| Prince Welded Tee Cylinder - 2500 PSI, 3in.Bore, 8in.Stroke, 1 1/2in. Shaft, Model# PMC-8308
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 3, Stroke Length (in.): 8, Closed Pin Center (in.): 16, Shaft Diameter (in.): 1 1/2 | *$159.99 |
| Prince Welded Tee Cylinder - 2500 PSI, 4in. Bore, 16in. Stroke, 2in. Shaft, Model# PMC-5616
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 16, Closed Pin Center (in.): 25, Shaft Diameter (in.): 2 | *$249.99 |
| Prince Welded Tee Cylinder - 2500 PSI, 4in. Bore, 20in. Stroke, 2in. Shaft, Model# PMC-5620
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 20, Closed Pin Center (in.): 29, Shaft Diameter (in.): 2 | *$269.99 |
| Prince Welded Tee Cylinder - 2500 PSI, 4in. Bore, 30in. Stroke, 2in. Shaft Size, Model# PMC-5630
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 30, Closed Pin Center (in.): 39, Shaft Diameter (in.): 2 | *$309.99 |
| Prince Welded Tee Cylinder - 2500 PSI, 4in. Bore, 36in. Stroke, 2in. Shaft, Model# PMC-5636
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 36, Closed Pin Center (in.): 45, Shaft Diameter (in.): 2 | *$319.99 |
| Prince Welded Tee Cylinder - 2500 PSI, 4in. Bore, 48in. Stroke, 2in. Shaft Size
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 48, Closed Pin Center (in.): 58, Shaft Diameter (in.): 2 | *$419.99 |
 | Priority Flow Divider - 30 GPM Capacity
Brand: Prince
Divider has adjustable orifice. Rated up to 3000 PSI. Priority flow divider separates one input flow into two output flows. 0-30 GPM capacity. Priority flow is adjustable. One flow is constant and unaffected by input flow variations or load changes. The other port is an excess flow that can provide another circuit. 3/4in. ports. | *$94.99 |
 | 10 Ton Foot Air / Hydraulic Pump
Brand: Rafael Part Number: Lic-FAHP10
ulSpecifications: li Rated Pressure: 10,000 PSI li Air Pressure: 70 - 170 PSI li Stroke Length: 1" li Oil Flow at 100 PSI li Pressure: br 30 Cu.In/Min. at 0 PSI br 8 Cu.In/Min. at 10,000 PSI li Usable Oil Capacity: 42 Cu.In (690 cc) li Air Cunsumption: 10 CFM li Air Inlet: 1/4 NPT br Weight: 22.95 Lbs/ul | *$129.75 |
 | 10 Ton Hydraulic Porta Power
Brand: Raffael Tools Part Number: pp10
h3 PLEASE SELECT AN OPTION /h3 font class=r16 NOTE #1 :br This item may receive some damages during shipping. br If you decline the EXTRA PACKAGING option For $15.00, we will not cover for any replacement or cost of the Porta Power damaged.br /font Contents:br - Hydraulic Pumpbr - Jack Hosebr - 10 Ton Rambr - Spreader Rambr - Extension Tubesbr - Male Connetorbr - Flat Basebr - Wedge Headbr - Spreader Plunger Toebr - Spreader Ram Toebr - Flex Rubber Headbr - Serrated Saddlebr - Blow-Molded Casebr Weight: 70 Lbs br Updated on 9/3/2004 | *$157.33 |
 | 4 Ton Hydraulic Porta Power
Brand: Raffael Tools Part Number: pp4
h3 PLEASE SELECT AN OPTION /h3 font class=r16 NOTE #1 :br This item may receive some damages during shipping. br If you decline the EXTRA PACKAGING option For $10.00, we will not cover for any replacement or cost of the Porta Power damaged.br /font Contents:br - Hydraulic Pumpbr - Jack Hosebr - 4 Ton Rambr - Spreader Rambr - Extension Tubesbr - Male Connetorbr - Flat Basebr - Wedge Headbr - Spreader Plunger Toebr - Spreader Ram Toebr - Flex Rubber Headbr - Serrated Saddlebr - Blow-Molded Casebr Weight: 47 Lbs br Updated on 7/7/2005 | *$98.07 |
 | 8 Ton Air/Hydraulic Long Ram Jack - Small Base
Brand: Raffael Tools Part Number: Lic AJ8
- Capacity 8 Tonbr - Replacement For 2 Ton Engine Hoistbr - Height: 24-1/5"br - Pick Height: 43-1/2"br - Stroke: 18.9"br - Ram Diameter: 1.4"br - Air Pressure Range: 0.8 - 0.95 Mpabr Weight: 41.25 Lbs | *$106.30 |
 | Pull Back Ram for 10 Ton Porta Power
Brand: Raffael Tools Part Number: pp10-pbr
Stroke: 130mmbr Material: Steelbr Capacity: 10 Tonbr Color: Red body with black hookbr Weight: 15 Lbs | *$64.53 |
 | Pull Back Ram for 10 Ton Porta Power - Heavy Duty
Brand: Raffael Tools Part Number: pp10-pbr-hd
li Stroke: 6" li Material: Steel li Capacity: 10 Ton br Weight: 19.95 Lbs | *$172.09 |
 | RapidAir Union Elbow Fitting - 1/2in., Model# 50300
Brand: RapidAir
RapidAir union elbow fitting (along with other RapidAir components, sold separately) enables you to expand your compressed air piping system, putting air lines exactly where you want them. Simply push air compressor tubing into the fitting until seated. Tubing can be removed by pushing on release button. Molded mounting hole makes for clean installation appearance. U.S.A. Fitting Size (in.): 1/2, Degree of Angle ( deg ): 90 | *$3.95 |
 | Lion Cross-Tube Welded Hydraulic Cylinder - 3000 PSI, 2in. Bore, 8in. Stroke, 1 1/16in. Shaft, Model# 20WX08-112
Brand: Red Lion
Ideal for high- or low-pressure industrial or construction applications. Cross-tube welded cylinder operates at 3000 PSI with a 6000 PSI proof pressure rating. Ports are 3/4-16 UNF ORB and are 90deg to pins. Cap and cross tube ends are durable steel cast components made to withstand continuous high loads. Precision finished skived and burnished heavy wall steel tubing for extended seal and cylinder life. Max. PSI: 3,000, Bore Diameter (in.): 2, Stroke Length (in.): 8, Shaft Diameter (in.): 1 1/16 | *$149.99 |
| Lion Cross-Tube Welded Hydraulic Cylinder - 3000 PSI, 4in. Bore, 8in. Stroke, 2in. Shaft, Model# 40WX08-200
Brand: Red Lion
Ideal for high- or low-pressure industrial or construction applications. Cross-tube welded cylinder operates at 3000 PSI with a 6000 PSI proof pressure rating. Ports are 3/4-16 UNF ORB and are 90deg to pins. Cap and cross tube ends are durable steel cast components made to withstand continuous high loads. Precision finished skived and burnished heavy wall steel tubing for extended seal and cylinder life. Max. PSI: 3,000, Bore Diameter (in.): 4, Stroke Length (in.): 8, Shaft Diameter (in.): 2 | *$239.99 |
| Red Lion Cross-Tube Welded Hydraulic Cylinder - 3000 PSI, 3in. Bore, 8in. Stroke, 1 1/2in. Shaft, Model# 30WX08-150
Brand: Red Lion
Ideal for high- or low-pressure industrial or construction applications. Cross-tube welded cylinder operates at 3000 PSI with a 6000 PSI proof pressure rating. Ports are 3/4-16 UNF ORB and are 90deg to pins. Cap and cross tube ends are durable steel cast components made to withstand continuous high loads. Precision finished skived and burnished heavy wall steel tubing for extended seal and cylinder life. Max. PSI: 3,000, Bore Diameter (in.): 3, Stroke Length (in.): 8, Shaft Diameter (in.): 1 1/2 | *$169.99 |
 | Red Lion Welded Cylinder - 2500 PSI, 14in. Stroke, Model# 25WC14-150
Brand: Red Lion
Excellent for loaders, engine hoists and small boom conveyors. 1 12in. chrome rod, crown piston seals with wear ring, hallite rod seals, cross tube base end and threaded end. Complete with ductile threaded rod clevis, one pin and retaining clips. | *$159.99 |
 | Red Lion Welded Cylinder - 2500 PSI, 30in. Stroke, Model# 25WC30-150
Brand: Red Lion
Excellent for loaders, engine hoists and small boom conveyors. 1 12in. chrome rod, crown piston seals with wear ring, hallite rod seals, cross tube base end and threaded end. Complete with ductile threaded rod clevis, one pin and retaining clips. | *$219.99 |
 | Red Lion Welded Double-Acting Cylinder - 2500 PSI, 36in. Stroke, Model# 25WC36-150
Brand: Red Lion
Excellent for loaders, engine hoists and small boom conveyors. 1 1/2in. chrome rod, crown piston seals with wear ring, hallite rod seals, cross tube base end and threaded end. Complete with ductile threaded rod clevis, one pin and retaining clips. | *$229.99 |
 | De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Double Acting, C = 2.128, O = 1/4-20 (1 Each)
Brand: Reid Supply Company Part Number: 090-021-111 | *$199.24 |
| De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Double Acting, C = 2.441, O = 5/16-24 (1 Each)
Brand: Reid Supply Company Part Number: 090-022-222 | *$235.49 |
| De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Double Acting, C = 2.68, O = 1/2-13 (1 Each)
Brand: Reid Supply Company Part Number: 090-023-333 | *$277.62 |
| De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Double Acting, C = 2.998, O = 1/4-20 (1 Each)
Brand: Reid Supply Company Part Number: 090-021-114 | *$219.89 |
 | De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Single Acting, C = 2.441, O = 5/16-24 (1 Each)
Brand: Reid Supply Company Part Number: 090-012-221 | *$225.35 |
| De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Single Acting, C = 2.68, O = 1/2-13 (1 Each)
Brand: Reid Supply Company Part Number: 090-013-332 | *$279.41 |
| De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Single Acting, C = 2.998, O = 1/4-20 (1 Each)
Brand: Reid Supply Company Part Number: 090-011-113 | *$224.71 |
| De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Single Acting, C = 3.651, O = 5/16-24 (1 Each)
Brand: Reid Supply Company Part Number: 090-012-224 | *$277.07 |
 | De-Sta-Co Hydraulic Power Workholding, Spring Advance Work Support, Capacity = 1,650 lbs. (1 Each)
Brand: Reid Supply Company Part Number: 040-1-1650 | *$233.52 |
 | De-Sta-Co Hydraulic Power Workholding, Spring Advance Work Support, Capacity = 2,500 lbs. (1 Each)
Brand: Reid Supply Company Part Number: 040-1-2500 | *$217.34 |
 | De-Sta-Co Hydraulic Power Workholding, Spring Advance Work Support, Capacity = 5,000 lbs. (1 Each)
Brand: Reid Supply Company Part Number: 040-1-5000 | *$248.68 |
 | De-Sta-Co Hydraulic Power Workholding, Swing/Pull Clamp Arm, A = 1.929, B = .709, C = M6 (1 Each)
Brand: Reid Supply Company Part Number: 031-S-475
Custom built arms of any length must clamp to the swing/pull clamp's piston rod in a manner similar to the arms or some derating of the clamp will be necessary. IMPORTANT: Any clamp using a modified or custom arm that is longer or heavier than standard arms must be derated to prevent internal damage. | *$33.09 |
| De-Sta-Co Hydraulic Power Workholding, Swing/Pull Clamp Arm, A = 3.268, B = .866, C = M10 (1 Each)
Brand: Reid Supply Company Part Number: 031-S-2400
Custom built arms of any length must clamp to the swing/pull clamp's piston rod in a manner similar to the arms or some derating of the clamp will be necessary. IMPORTANT: Any clamp using a modified or custom arm that is longer or heavier than standard arms must be derated to prevent internal damage. | *$48.09 |
| De-Sta-Co Hydraulic Power Workholding, Swing/Pull Clamp Arm, A = 3.959, B = .709, C = None (1 Each)
Brand: Reid Supply Company Part Number: 031-L-475
Custom built arms of any length must clamp to the swing/pull clamp's piston rod in a manner similar to the arms or some derating of the clamp will be necessary. IMPORTANT: Any clamp using a modified or custom arm that is longer or heavier than standard arms must be derated to prevent internal damage. | *$46.96 |
| De-Sta-Co Hydraulic Power Workholding, Swing/Pull Clamp Arm, A = 7.226, B = .866, C = None (1 Each)
Brand: Reid Supply Company Part Number: 031-L-2400
Custom built arms of any length must clamp to the swing/pull clamp's piston rod in a manner similar to the arms or some derating of the clamp will be necessary. IMPORTANT: Any clamp using a modified or custom arm that is longer or heavier than standard arms must be derated to prevent internal damage. | *$75.59 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Body Cylinder, Double Acting, D=1.750-16, K=1/4-20 (1 Each)
Brand: Reid Supply Company Part Number: 010-021-111 | *$139.36 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Body Cylinder, Double Acting, D=1.875-16, K=5/16-24 (1 Each)
Brand: Reid Supply Company Part Number: 010-022-225 | *$171.77 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Body Cylinder, Double Acting, D=2.500-16, K=1/2-13 (1 Each)
Brand: Reid Supply Company Part Number: 010-023-335 | *$221.72 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Body Cylinder, Double Acting, D=2.500-16, K=1/2-13 (1 Each)
Brand: Reid Supply Company Part Number: 010-023-333 | *$190.66 |
|
